User manual BOSCH WOL1270IL

[. . . ] bosch-hausgeraete. de 2 Table of Contents Disposal Information . 4 5 6 7 9 11 12 14 19 21 23 25 26 28 34 38 39 3 Please read this instruction manual and all other information accompanying the washing machine before operating the appliance. Please retain all documents for future reference or for a subsequent appliance owner. Disposal Information Disposing of the packaging The shipping package has protected your new appliance on its way to your home. Please contribute to a better environment by disposing of packaging materials in an environmentally conscious manner. [. . . ] q Do not exceed the maximum load capacity: Overfilling reduces the washing result and increases crease formation. If there are fewer items of washing, the water and energy requirement is automatically reduced by the washing machine. Do not trap items of washing between the drum and drum lid. 18 Laundry Detergents and Additives Dispensing the correct amount of detergent d Risk of poisoning!30 °C Delicates For sensitive, easy care fabrics made from cotton, synthetics or blended fibres, and net curtains. 30 °C, Woollens cold For hand or machine washable fabrics made from wool or wool blend. 6 21 Extra cycle programme selector Rinse Separate rinsing cycle with subsequent spin cycle for easy care fabrics. Drain Draining of the rinsing water after a wash programme with the Rinse hold" setting for the gentle treatment of delicate laundry. Option buttons r An additional rinsing cycle is performed; The washing duration will be prolonged accordingly. Recommended application: In areas with very soft water. D Reduced washing duration - only 2 rinsing cycles. ~ Basic setting = Button not pressed The fabrics will be spun at the maximum possible spin speed. Unbalanced load detection system The automatic unbalanced load detection system spins the washing several times to ensure even distribution. In the woollens programme the washing is spun only twice to prevent matting. If the washing is very unevenly distributed, the machine will not spin. 22 Washing q Turn on the water tap. Start the programme q Turn the programme selector to the desired pro gramme (refer also to separate Programme Chart"). The Ready" control light comes on. q Where required, press the option button(s) for additional function(s). q Press the 3" button. The Active" control light remains lit for the entire duration of the programme. 23 Changing a programme If you have accidentally selected the wrong programme: q Turn the programme selector to Off". The Active" control light comes on, and the new programme starts. Cancelling active programme If you wish to prematurely end a programme: q Turn the programme selector to Off". The Active" control light comes on. 24 When the Programme has Ended The End" control light comes on. q Turn the programme selector to Off", and, where required: q Select a programme option (Drain", Spin" or Rinse"). q At the end of the programme option, turn the programme selector to Off". Unloading the laundry q Turn off the water tap. (If appliance features Aqua Stop, turn off tap only if house is empty for a prolonged period) q Open the appliance lid and drum lid. If the loading door cannot be opened: Wait for 2 minutes (the safety function is active) or there is still water in the washing machine if the C" option was selected. coins, paper clips) from the drum and rubber seal - risk of rust formation!q Leave the lid open so that the inside of the washing machine can dry out. 25 Special Applications Pre soak q Load laundry of the same colour. q Add the presoak agent to chamber II according to the manufacturer's specifications. [. . . ] Close the lid ("clicks" shut). Plug loose or not plugged in. "Ready", "Active" and "End" indicator lights flash. Appliance lid not closed. Drum lid not closed. Close the lid. "3" button not pressed. Clean the drainage pipe and/or drainage hose, see Page 30. Water runs out from under the appliance. [. . . ]