User manual BOSCH UNEO MAXX

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] A complete overview of accessories can be found in our accessories program. 18 | English The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Cordless Rotary Hammer Article number Rated voltage Rated speed Impact rate Impact energy per stroke according to EPTA-Procedure 05/2009 Tool holder Max. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 2006/42/EC. Typically the A-weighted noise levels of the product are: Sound pressure level 85 dB(A); Sound power level 96 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Hammer drilling into concrete: Vibration emission value ah=13 m/s2, Uncertainty K=3 m/s2, Drilling into metal: Vibration emission value ah=4 m/s2, Uncertainty K=1. ) as well as during transport and storage, set the rotational direction switch to the centre position. For drilling without impact in wood, metal, ceramic and plastic, a suitable SDS-Quick tool or an application tool with hexagon shank can be used. For screwdriving, use only screwdriver bits with ball catch 14 (DIN 3126-E6. Other screwdriver bits 13 can be inserted via a universal bit holder with ball catch 12. A selection of suitable application tools can be found in the Accessories Overview at the end of these instructions. Only these battery chargers are matched to the lithium ion battery of your power tool. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. The lithium ion battery can be charged at any time without reducing its service life. When the battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no longer rotates. Do not continue to press the On/Off switch after the machine has been automatically switched off. [. . . ] Only for EC countries: According to the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. battery packs/batteries: Li-ion: Please observe the instructions in section "Transport" , page 22. Do not dispose of battery packs/batteries into household waste, fire or water. battery packs/ batteries should , if possible , be discharged , collected , recycled or disposed of in an environmental-friendly manner. [. . . ]