User manual BOSCH SCE52M65EU

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BOSCH SCE52M65EU. We hope that this BOSCH SCE52M65EU user guide will be useful to you.


BOSCH SCE52M65EU : Download the complete user guide (1669 Ko)

You may also download the following manuals related to this product:

   BOSCH SCE52M65EU (1729 ko)
   BOSCH SCE52M65EU (1709 ko)
   BOSCH SCE52M65EU (1702 ko)
   BOSCH SCE52M65EU (1746 ko)
   BOSCH SCE52M65EU (2744 ko)

Manual abstract: user guide BOSCH SCE52M65EU

Detailed instructions for use are in the User's Guide.

[. . . ] 36 This appliance is intended for use in the home and the home environment. Use the dishwasher only in the household and only for its designed purpose: for washing domestic dishes. Safety instructions yf tS e a sic nusi otrtn Children from 8 years of age or people whose physical, sensory or mental abilities or their lack of experience or knowledge prevent them from using the appliance safely must not use this appliance without supervision or instruction by a responsible person. Before you switch ON the appliance Please read the operating and installation instructions carefully. They contain important information on how to install, use and maintain the appliance. [. . . ] Each time the button is pressed, the set value increases by one level; when the value of : has been reached, the display jumps back to : (off). The set value is saved. Timer programming * * depending on model You can delay the start of the programme in 1-hour steps up to 24 hours. Press 8 + or – button until the displayed time corresponds with your requirements. To delete timer programming, press the 8 + or – button until h : is indicated on the digital display. You can change your programme selection at any time until the programme starts. End of programme The programme has ended when the value : is indicated on the numerical display h. Switching off automatically after the end of the programme * Switchingof automaticalyafterthe ndoftheprogram e Switching off the appliance Short time after the end of the programme: 1. Remove the utensils when they have cooled down. * depending on model To save energy, the dishwasher is switched off 1 minute after the programme ends (factory setting). 20 Operating the appliance Note When the programme ends, leave the appliance to cool down a while before opening it. This will prevent steam from escaping and causing longterm damage to your built-in furniture. en Intensive drying The final rinse uses a higher temperature which improves the drying result. Hold down programme button # and press START button H until the digital display h : . . . The LED for button # flashes and the digital display h displays the factory setting : . Press programme button # until the factory set value : is indicated on the digital display h. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. To continue the programme, switch on the ON/OFF switch ( again. Terminating the programme (Reset) Terminatingtheprogram e 1. Switch off ON/OFF switch (. Changing the programme When the START button H has been pressed, the programme cannot be changed. The only way a programme can be changed is by Cancel programme (Reset). 21 en Cleaning and maintenance Cleaning and maintenance gC ne i nl a d n a en cm nti aa e m Warning – Health hazard Never use other domestic detergents, e. g. containing chlorine! A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Special salt and rinse aid Check the refill indicators X and `. If required, refill salt and/or rinse aid. Overall condition of the machine Check spray arm for grease and limescale deposits. Start the appliance without utensils in the programme with the highest rinsing temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. To ensure that the door seal always remains clean and hygienic, regularly clean it with a damp cloth and a little washing-up liquid. If the appliance is switched off for a prolonged period, leave the door ajar to prevent the formation of an unpleasant odour. [. . . ] Ensure that the drainage hose is not kinked, crushed or twisted and that there is no cover plate in the drainage to prevent the waste water from flowing out! Drinking water connection 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts. Ensure that the drinking water connection is not kinked, crushed or twisted. Inlet rate: Minimum 10 litres/minute 34 Installation and connection Water temperature: Note printing on the water inlet hose! [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH SCE52M65EU




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH SCE52M65EU will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.