User manual BOSCH SBU69T05AU

[. . . ] Dishwasher 9000 417 831 (8811) aus Instructions for use aus Index 4 4 4 4 4 4 4 4 5 5 5 6 6 7 7 7 7 7 8 8 8 8 8 9 9 9 10 11 12 13 13 13 13 13 13 13 13 Washing the dishes . 14 14 14 14 14 14 15 15 15 15 15 16 16 16 16 16 16 17 17 18 18 18 18 19 19 20 20 21 21 22 22 22 22 22 23 23 23 24 24 24 Safety instructions . . aus Safety instructions Delivery Check the packaging and dishwasher immediately for damage caused in transit. Please dispose of the packaging material in an environmentally friendly manner. [. . . ] If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. Close the door. Automatic switch off when programme ends To save energy, the dishwasher is switched off 20 minutes after the programme ends. Hold down programme button A and press START button 9 until is indicated on the digital display. Press programme button A until the factory set value 3 is indicated on . the digital display To change the setting: Press the button C to switch the function off or on . 15 aus Changing the programme When the START button 9 has been pressed, the programme cannot be changed. The only way a programme can be changed is by Cancel programme (reset). Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Intensive drying The final rinse uses a higher temperature which improves the drying result. Hold down programme button A and press START button 9 until on the digital display is indicated. To change the setting, Press the button C to switch intensive drying on or off . Close the door. Overall condition of the machine Check spray arm for grease and limescale deposits. Start the appliance without utensils in the programme with the highest rinsing temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces. Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time. Health hazard! Interior light * 20 The interior light comes on when the door is opened irrespective of whether the ON/OFF switch 1 is switched on or off. Hold down programme button A and press START button 9 until is indicated on the digital display. Press programme button A until the factory set value is indicated on the digital display 3 . To change the setting, Press the button C to switch the interior light off or on . * depending on model 16 Rinse-aid As soon as the rinse-aid refill indicator lights up on the control panel 5 , refill with rinse aid. aus Filters The filters 26 keep large foreign objects in the rinsing water away from the pump. [. . . ] Drain the appliance according to the following steps: Turn on the tap. The expected programme duration is indicated on the numerical display 3 . (This prevents residual water from running into the machine control and damaging the programme sequence). 23 aus Waste disposal Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials. [. . . ]