User manual BOSCH PSS 200 AC

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. [. . . ] Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1 Thumbwheel for orbit frequency preselection(PSS 250 AE) 2 On/Off switch 3 Dust box, complete (micro filtersystem) 4 Sanding-sheet clamp (PSS 190 AC/PSS 200 AC/PSS 250 AE) 5 Sanding plate 6 Sanding sheet 7 Handle (insulated gripping surface) 8 Extraction outlet 9 Filter element (micro filtersystem) 10 Vacuum hose* 11 Perforating tool* *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. Orbital sander Article number Rated power input Preselection of orbital stroke rate No-load speed No-load orbital stroke rate Orbit diameter Sanding sheet dimensions -- Adhesion via Velcro backing -- Attachment via clamping Weight according to EPTA-Procedure 01/2003 Protection class min-1 min For lower voltage and models for specific countries, these values can vary. Typically the A-weighted noise levels of the product are: Sound pressure level 82 dB(A); Sound power level 93 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. [. . . ] For the working of paint/enamel coats or primers and fillers For sanding off paint For sanding primer For final sanding of primers before coating coarse medium 40, 60 80, 100, 120 The vacuum cleaner must be suitable for the material being worked. When vacuuming dry dust that is especially detrimental to health or carcinogenic, use a special vacuum cleaner. The voltage of the power source must agree with the voltage specified on the nameplate of the machine. [. . . ]