User manual BOSCH PSE 180 E REV 3-2009

[. . . ] 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] English | 15 The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. Electric scraper Article number Rated power input Stroke rate at no load n0 Stroke Weight according to EPTA-Procedure 01/2003 Protection class W PSE 180 E 0 603 316 7. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for partial removal and scraping off of flooring material, adhesive, paint or filler remainders, for smooting out irregularities, as well as for carving soft wood. For lower voltage and models for specific countries, these values can vary. Typically the A-weighted sound pressure level of the product is 75 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. 1 Blade* 2 Tool holder 3 Dust protection cap 4 On/Off switch with stroke rate preselection 5 Tool-lock button 6 Blade cover for extra-sharp blades *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. With the working edge facing downward, insert the application tool (e. Pull the application tool out of the tool holder 2, until it can be heard to engage. Incorrect or not securely fastened application tools/accessories can come loose during operation and pose a hazard. to remove the application tool , press the toollock button 5 and pull out the application tool. Clean the shank end of the application tool each time after removing it. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). English | 17 The required stroke rate is dependent on the material and the working conditions and can be determined by a practical trial. [. . . ] Exploded views and information on spare parts can also be found under: www. Com Our customer consultants answer your questions concerning best buy, application and adjustment of products and accessories. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. [. . . ]