User manual BOSCH PIA611T16E INSTALLATION INSTRUCTIONS

[. . . ] 4 en Installation Instructions Assembly over dishwasher (figure 2c) S If the hob is installed over a dishwasher, an intermediate accessory must be installed. S The working surface upon which the hob is installed must be a minimum of 20 mm and a maximum of 40 mm thick. S The space between the top of the working surface and the top of the dishwasher must be: - 60 mm if installed over a compact dishwasher. Important notes S Safety in use is only guaranteed if the technical installation of the hob has been carried out correctly and in accordance with the installation instructions. [. . . ] Pan detection Each hotplate has a minimum limit for detecting pans, which varies depending on the material of the pan being used. You should therefore use the hotplate that is most suitable for the diameter of your pan. Double or triple hotplate These hotplates can detect pans of different sizes. Depending on the material and properties of the pan, the hotplate will adapt automatically, switching on part or all of the hotplate and supplying sufficient power to obtain good cooking results. ** $ Single hotplate æ Broiler q Resistive plate-warming zone* ** The residual heat warning light comes on. Use only cookware suitable for induction cooking; see the "Suitable cookware" section. Residual heat indicator The hob has a residual heat indicator for each hotplate to show those which are still hot. Even when switched off, the œ/• light will remain on as long as the hotplate remains hot. If the pan is removed before the hotplate is turned off the œ/ • indicators and the selected power level will appear alternately. Programming the hob This section will show you how to program the hotplates. To turn off: press the % symbol until the indicator above the main switch disappears. The residual heat indicator stays lit until the hotplates have cooled off. Note: The hob switches off automatically when all the hotplates are switched off for more than 20 seconds. 25 Switching the hob on and off The hob is turned on and off using the main switch. Set the hotplate Select the required power level with the + and - symbols. Press the + or - symbol of the required hotplate and its   display lights up ‹. To change the power level, press the + or - symbol until the The default settings appear. Turning off the hotplate Press the + or - symbol until ‹ appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. Power level Melt Chocolate, chocolate coating, butter, honey Gelatine Heating and warming Stew (e. 26 Power level Broil** Steaks, chops (plain or breaded) Beefsteak (3 cm thick) Chicken breast (2 cm thick) Fish and fish fillet without breading Fish and fish fillet with breading Prawns and shrimps Frozen meals (e. Childproof lock The hob can be protected against being accidentally turned on, to ensure that children do not switch on the hotplates. [. . . ] The electronic system has overheated and all the hotplates have been switched off. The hotplate has been working non-stop too long at a high power level. The hotplate has overheated and has Wait until the electronic system has cooled down sufficiently before switched off in order to protect its cooking switching the hotplate back on. 30 Normal noise while the appliance is working Induction heating technology is based on the creation of electromagnetic fields that generate heat directly at the base of the pan. [. . . ]