User manual BOSCH IXO

[. . . ] Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. [. . . ] When the battery is defective, liquid can escape and come into contact with adjacent components. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. The heating of the battery charger during the charging process can pose a fire hazard. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Use the machine only when you can fully assess all functions and handle them without limitation, or after having received appropriate instructions. A complete overview of accessories can be found in our accessories program. Weight according to EPTA-Procedure 01/2003 Battery Capacity Number of battery cells Battery Charger Article number Charging time h 2 607 225 507 5 Ah V= min Please observe the article number on the type plate of your machine. Typically the A-weighted sound pressure level of the product is less than 70 dB(A). English | 37 Vibration total values (triax vector sum) determined according to EN 60745: Screwdriving without impact: Vibration emission value ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. We declare under our sole responsibility that the product described under "Technical data" is in conformity with the following standards or standardization documents: EN 60745 (battery powered product) and EN 60335 (battery charger) according to the provisions of the directives 2006/95/EC, 2004/108/EC, 98/37/EC (until 28 Dec 2009), 2006/42/EC (from 29 Dec 2009). The voltage of the power supply must correspond with the data given on the nameplate of the battery charger. To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time. [. . . ] For more information, please refer to the instruction sheet (in English) under the following Internet address: http://purchasing. Only for EC countries: Do not dispose of power tools into household waste!According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Do not dispose of battery packs/batteries into household waste, fire or water. [. . . ]