User manual B&W MATRIX 1 E BROCHURE

[. . . ] [. . . ] The Matrix 1E comprises of one 6in bass/midrange and 1in tweeter with specially selected polyamide dome. q q There is an optional, purpose-designed stand. Technical highlights q The crossover network is a forth order Butterworth squared, with an acoustic stop band attenuation of 24dB per octave. The transducer response roll-off employed combines with a minimum number of electronic components. q B&W's Tweeter technology ensures that the sound remains focused and time sensitive and that the stereo image is presented with unparalleled three dimensional accuracy q Both high and low pass networks are wired separately to twin input sockets, allowing `biwiring' or `bi-amplification' to the main amplifier. These alternatives produce audible reductions of intermodulation distortion between high and low frequencies. A simple link allows for normal connection. Drive Units 1 x 25mm tweeter with specially selected polymide dome 1 x 150mm bass/midrange driver with homopolymer polypropylene cone, 31mm voice coil on Kapton® former, phenolic-bonded and heat cured Sensitivity 86dB spl(1 watt 8 ohms) Nominal Impedance 8 ohms Power Handling Dimensions 50W ­ 120W at 8 ohms Height: 410mm Width: 230mm Depth: 322mm Finish Real wood veneers of walnut, black ash or rosewood Free Field Response Better than ±2dB, 80Hz ­ 25kHz ± 30° horizontal ± 2dB to 10Hz ±5° vertical ± 2dB to 20kHz B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. [. . . ] [. . . ]