User manual AUSTRALIAN MONITOR TX3014

[. . . ] TX3014, Dual Priority Voice Operated Muting Module Installation Instructions Thank you for choosing an Australian Monitor Installation Series TX3014 dual priority voice operated muting module. [. . . ] Connect the module to this receptacle, ensuring that the black trace found on the wires of the module is facing the front of the amplifier. For installation into the TX6000 mixer: Locate the 8 pin `end' connector found on location X3 on the mixer PCB in between the input gain pots for Ch 2 and Ch 3. This `end' connector is divided into two separate parts consisting of 5 pins and 3 pins. Connect the module to this receptacle, ensuring that the black trace found on the wires of the module is facing the front of the amplifier. For installation into the TX8000 mixer: Locate the 8 pin `end' connector found on the mixer PCB behind the input gain pot for Ch 1. This `end' connector is divided into two separate parts consisting of 5 pins and 3 pins. Connect the module to this receptacle, ensuring that the black trace found on the wires of the module is facing the front of the amplifier (so that the wires exit towards the left hand side of the mixer when looking from the front). Engineered by Audio Telex Communications Pty Ltd, Sydney, Australia A. B. N. 78 001 345 482 Inc in NSW www. audiotelex. com. au Export Sales & Corporate Head Office Private Bag 149, Silverwater NSW 1811 149 Beaconsfield Street, Silverwater NSW 2128 Australia Ph: 61-2- 9647 1411 Fax: 61-2-9748 2537 E-mail: ho@audiotelex. com. au Sydney (NSW & ACT Sales) Private Bag 149, Silverwater NSW 1811 149 Beaconsfield Street, Silverwater NSW 2128 Ph: (02) 9647 1411 Fax: (02) 9648 3698 E-mail: nsw@audiotelex. com. au Adelaide (SA & NT Sales) P. O. [. . . ] Box 512, Albany 1331 Unit B, 11 Piermark Drive, Albany 1331 Ph: (09) 415 9426 Fax: (09) 415 9894 E-mail: audiotlx@nznet. gen. nz [. . . ]