User manual AUSTRALIAN MONITOR CLIM
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AUSTRALIAN MONITOR CLIM. We hope that this AUSTRALIAN MONITOR CLIM user guide will be useful to you.
 |
AUSTRALIAN MONITOR CLIM : Download the complete user guide (70 Ko) |
Manual abstract: user guide AUSTRALIAN MONITOR CLIM
Detailed instructions for use are in the User's Guide.
[. . . ] Series amplifiers, some wiring is in the way, restricting CLIM power limiter card to the l0 Pin Header pins on the main amplifier board. [. . . ] 6,
Remove the signal strapping link on the l0-Pin header on the Main Amp PCB. Push the PCB standoffs into the CLIM Card and ensure it "clicks / locks" into position. Make sure the open "gullet" area of the standoff will be facing down towards the header socket. Line up the header socket on the CLIM Card with the header pins on the Main Amp PCB. Check that no components are in the way and that no wiring will be caught by the CLIM Card. Once you are sure that the header socket and pins do line up and all components are clear - push the CLIM Card onto the header pins until the mounting holes in the PCB standoffs line up with the mounting screw clearance holes in the heatsink. [. . . ] Set RVI in position.
Do a final inspection ofyour installation checking that the card is located securely and wiring or components are not binding on any adjacent suriaces. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AUSTRALIAN MONITOR CLIM
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AUSTRALIAN MONITOR CLIM will begin.