User manual AUDIOLINE VR R40

[. . . ] the AUDIOLINE VR R40 is equipped with a circuit to increase the battery life. If no activity takes place within one minute, the unit switches itself off automatically. the maximum recording time for the AUDIOLINE VR R40 is 129 minutes in standard mode and 281 minutes in long play mode. Now select the required recording mode SP (Standard) or LP (Long-Play) using the MODE button. [. . . ] If you want to find a particular memo within an archive file, you can use the SCAN function. Here, only the first 5 seconds of the memo are played back before switching automatically to the next memo. When you have found the right message, press the multi once more to hear this memo in its entirety. If you want to search quickly within the archive file, hold the or until you see the required number in the display. You can change automatically to the previous or next memo while you are listening to a memo. If however you want to break off the erasing process, press any button other than the ERASE button. First select the required file A, B, C or D that you want to erase by using the FILE button. Now press both the REC and ERASE buttons simultaneously for three seconds. If however you want to break off the erasing process, press any button other than the ERASE button. Press FM/MODE button more then 1 seond and the VR R40 will be changed to the radio. Earphone will be used as FM antenna, when the user listen to the radio by earphone. During speaker playback the IN connector can be used as antenna by connecting the earphone to the IN connection. After reaching the last radio station at 108 MHz, press the button to search down-wards. The HOLD slide switch can be found on the right-hand side of the unit. If the function is switched on (switch in the direction of the arrow), the unit can no longer be used. This prevents any unintentional recording or play back when carrying, for example. The display shows the message "HOLD" if any button is pressed. Your AUDIOLINE VR R40 can be used with an external microphone (optional) and ear piece. The connection for the microphone IN and the EAR piece can be found on the top of the AUDIOLINE VR R40. Using your AUDIOLINE VR R40, you can record signals from other sources such as stereo equipment or a radio, for example. To do this, connect the provided cable between the microphone input IN and the appropriate audio output connection on the required equipment. With these units, use either the headphones output or an audio output and never a loudspeaker connection. [. . . ] The guarantee is invalidated if the equipment has been tampered with by the purchaser or third parties. Any damage caused by improper handling or operation, by incorrect positioning or storage, by improper connection or installation or by excessive force or other external influences is not covered by the guarantee. in the case of complaint , we reserve the right to repair or replace defective parts or to exchange the equipment. Claims for compensation are excluded insofar as they do not relate to criminal intent or gross negligence on the part of the manufacturer. [. . . ]