User manual AUDIOLINE TEL6

[. . . ] CE mark - The telephone complies with the basic requirements of the R&TTE Directive This is confirmed by the CE mark. - General Information Temperature and ambient conditions - The telephone is designed for use in protected rooms with a temperature range of 10 °C to 30 °C. The telephone must not be installed in damp rooms such as a bathroom or laundry room. Avoid proximity to sources of heat such as radiators and do not expose the unit to direct sunlight. [. . . ] If you are using the telephone fitted to the wall, you can hang the receiver on the telephone without hanging up. You will find a small hook for this purpose at the upper end of the receiver rest. Adjustable ring tone By means of the slide switch you can choose the settings (loud) or (soft) to match the volume of the ringing tone to your requirements. If at any time you do not want to be disturbed, use the setting (off). You can switch off the microphone during a call using the mute button, . The loudspeaker remains switched on and you can continue to hear the other party. To mute the microphone, press and hold the mute button once while a call is being made. To switch the microphone on again, release the mute button and you will be able to continue your call as normal. - Operation Making a call using the speed dial buttons Now press the required storage location between 0 and 9 on the keypad. Please contact DEUTSCHE TELEKOM to gain access to these functions (some of which are subject to charge). When using T-NET functions, move the slide switch on the right side to the "300ms" position. Dialling telephone numbers when using on private exchanges With private exchanges, it is necessary to dial a certain number (e. "9" or "0") in order to obtain a dialling tone for an outside line on the extension. With some, older private exchanges, it takes some time before the dialling tone can be heard. Especially for these private exchanges, an automatic pause can be inserted after connecting to the outside line so that you can dial directly without waiting for the dialling tone. Press the redial button once between the number for the outside line and the actual telephone number. After connecting to an outside line your telephone will wait for 3 seconds before dialling the actual telephone number. Remove all extra telephone equipment and connect only the telephone directly to the telephone socket. If the fault is still present, connect another telephone (if available) to the telephone socket. The results will show you whether the fault lies with the unit or with the telephone line. In the case of technical problems you can also contact our Service Department on the Hotline number 0180 5 00 13 88 (costs Telekom by printing: 12ct/min). - Important information Exchanged parts or exchanged equipment become our property. [. . . ] The telephone complies with the basic requirements of the R&TTE Directive "1999/5/EEC". For the complete Declaration of Conformity, please use the free download from our web site www. You can use the "R" signal button on your telephone on private exchanges and when using DEUTSCHE TELEKOM's T-Net functions. Private exchanges - If you have connected your telephone to a private exchange, you can use all the facilities such as call transfer, automatic recall, etc. [. . . ]