User manual AUDIOLINE TEL5-K

[. . . ] Disposal In order to dispose of your device, take it to a collection point provided by your local public waste authorities (e. g. The adjacent symbol indicates that the device must not be disposed of in normal domestic waste!According to laws on the disposal of electronic and electrical devices, owners are obliged to dispose of old electronic and electrical devices in a separate waste container. [. . . ] The rubber footpads on the telephone are not resistant to all cleaning agents. Therefore, the manufacturer is not liable for any damage to furniture or such. CE mark The telephone is compliant with the basic requirements of the R&TTE Directive. This is confirmed by the CE mark. 3 - Operating Elements 2 Operating Elements 1 Disconnect button / Receiver hook R button Redial / Dialling pause Connection to base unit Ringer volume control 2 3 1 4 5 5 4 Bottom of base unit 2 3 6 7 8 Fixation slots for wall mounting Socket for helix cable to receiver Socket for telephone cable 6 8 6 7 4 - Starting Up 3 3. 1 Starting Up General information ATTENTION!It is essential to read the General Information at the beginning of this manual before starting up. 3. 2 Checking the package contents a receiver a helix cable The package contains: a base unit a telephone connection cable an operating manual 3. 3 Connecting the receiver After unpacking the telephone, first of all connect the receiver to the base unit. Take one end of the helix cable and plug it into the socket at the bottom end of the receiver. Turn the base station over and plug the other end into the lower socket (see Chapter 2, Section Bottom of base unit, Item 7. ). Fit the cable securely in the cable duct. 3. 4 Connecting the telephone Attach the telephone cable (included) to the telephone line socket and the socket (see Chapter 2, Section Bottom of base unit, Item 8. ) on the bottom side of the base station. Thread the cable through the cable duct either towards the top or the bottom out of the telephone housing. The telephone uses tone dialling. 3. 5 Wall mounting The telephone can also be installed on a wall using two screws. Attach the base unit by hooking it over the two screws protruding from the wall and pushing it down a bit. When the phone is mounted on the wall, the receiver can be placed on-hook without breaking the connection. Position the small hook at the top end of the receiver cradle. 5 - Operation 4 4. 1 Operation Telephoning The telephone can be used just like any other conventional telephone. Please follow the instructions below: Pick up the receiver and wait for the dialling tone. [. . . ] When using some older private branch exchanges, it takes a little time before the dialling tone becomes audible. Particularly in the case of such private branch exchanges, it is useful to insert an automatic pause after the number for the outside line so that the number can be dialled in a continuous process without having to wait for the dialling tone. To insert a dialling pause, press the Redial button once after entering the number for the outside line and before entering the actual telephone number. [. . . ]