User manual AUDIOLINE TEL39G CLIP

[. . . ] Connection Information: The AUDIOLINE Telephone 39G CLIP requires a TAE socket with F/N coding in common with other plug in units such as fax machines, answering machines or modems. Approval and CE Marking: The unit is approved for use on the European telephone network. You will find the Declaration of Conformity at the end of this manual. 1 CONNECTING THE RECEIVER After unpacking your telephone, you must first connect the telephone receiver to the base unit. [. . . ] If the number dialled is longer, only the last 16 digits will be displayed. If you want to change from the receiver to the handsfree feature during a button and replace the receiver. You will hear the dialling tone over the display shows the in-built loudspeaker. If the number dialled is longer, only the last 16 digits will be displayed. If the other party accepts the call, his voice will be heard over the in-built loudspeaker. When using the handsfree facility always speak loudly and clearly towards the telephone. The volume can be adjusted using the control on the right-hand side of your telephone. If you want to change from the handsfree facility to the receiver, simply lift the receiver. 2 RECEIVING CALLS As soon as you receive a call, the callers number appears in the display. Further information on caller display is given in Chapter 4 Caller Display (CLID). The call can now be accepted using the receiver or the handsfree facility. 3 REDIAL If a connection that you have dialled is engaged or you were unable to get through to anybody, simply replace the receiver. The last number dialled with a maximum of 32 digits remains stored in the telephone automatically. 4 CALL DURATION DISPLAY The actual call duration in hours, minutes and seconds is shown in the display during a call. 5 STORING NUMBERS IN THE PHONE BOOK Your telephone allows you to store up to 18 telephone numbers in the phone book. With the receiver on the hook enter the required telephone number with a maximum of 16 digits using the number pad. Now enter the required storage location between 01 and 18 using the number pad and the telephone number entered will be stored. If a storage location has already been used, the display shows the message OVERWRITE. The selected storage location is overwritten with the new telephone number by means of the button. If you do or not want to overwrite the storage location, press one of the buttons to cancel the entry. Press the speed dial button and the required storage location from 01 to 18. You can also press the speed dial button and the required storage location between 01 and 18 directly. [. . . ] Any damage caused by improper handling or operation, by incorrect positioning or storage, by improper connection or installation or by excessive force or other external influences is not covered by the guarantee. in the case of complaint , we reserve the right to repair or replace defective parts or to exchange the equipment. Claims for compensation are excluded insofar as they do not relate to criminal intent or gross negligence on the part of the manufacturer. All guarantee claims according to these conditions must be raised exclusively with your dealer. [. . . ]