User manual AUDIOLINE TEL38 SMS

[. . . ] 54 Dialling and storing telephone numbers when using on private exchanges . Batteries Do not use any other kind of rechargeable batteries, as these could possibly lead to a short circuit. When changing the batteries, always use four new batteries, type AAA 1. Do not dispose of old or faulty batteries with the normal household waste. [. . . ] The telephone number will be deleted and the display will now show another number from the phone book. For 2 seconds until the message LEER Now press the Delete button again appears in the display. Using caller display, you can see in the case of incoming calls who is calling you. If this function is available on your line, the display shows you the caller's telephone number while the telephone is ringing. The display reports the following information when there is no telephone number available. If the message KEINE NUMMER (no number) appears in the display, the number has only been partially or incorrectly received. If the message PRIVAT appears in the display, the caller has suppressed the transmission of his telephone number or it was not possible to transmit the number. Your telephone will show the number in the display if your telephone provider offers this service. If this service is not available, incoming calls will not be shown in the display. In your absence, all calls will be saved in a caller list with date and time. When the list is full, the oldest number is always deleted from the list. If calls are registered during your absence, this will be indicated in the display by the message NEU and the indicator light for new calls will flash. Number of all new entires in the caller list Before you can work on the caller list, press several times the CLIP/ / button, until you see the message Caller list appearing in the display. The caller called several times The call is new Name of the caller, if stored in the phone book When all newly recorded numbers have been checked, the new call indicator light goes off and the NEU indicator in the display shows "0". If no button is pressed within 15 seconds, the caller list is no longer displayed and the display shows the current time and date once more along with the number of telephone numbers stored in the caller list and the number of newly stored telephone numbers. Dialling a telephone number directly from the caller list You can dial telephone numbers directly from the caller list. If you want to change to using the receiver, simply lift the receiver. Before dialling, your telephone compares the country and local dialling codes of the number selected with your location (country + local dialling code). If you have entered your country and local dialling code during installation, the appropriate numbers will not be dialled if this is a number from within your country or local network. Storing telephone numbers from the caller list in the phone book Select the telephone number from the caller list that you want to put into the phone book by using the Jogdial. The number has now been stored in the phone book and a name can also be assigned to it. Deleting telephone numbers from the caller list Select the telephone number from the caller list that you want to delete by using the Jogdial. [. . . ] Especially for these private exchanges, an automatic pause can be inserted after connecting to the outside line so that you can dial directly without waiting for the dialling tone. Entering the pause when dialling manually Press the redial button once between the code for the outside line and the actual telephone number. After an outside line has been obtained, you telephone will wait for 3 seconds before dialling the actual telephone number. Storing the pause with the number Simply press the redial button after the code for the outside line and before the actual telephone number when storing the number. [. . . ]