User manual AUDIOLINE TEL36CLIP

[. . . ] Putting the Telephone into Operation Caution: It is essential to read the safety information in Chapter 1 before preparing the telephone for use. The package contains: - a telephone - a telephone connection cable - a tabletop support - four batteries, type AAA - a receiver - a helix cable - an operating manual Plug the short end of the helix cable in the socket at the bottom of the receiver. Inserting the batteries 11 Insert the batteries before connecting the telephone to the telephone network. The batteries are required for the caller number display, handsfree feature and other telephone functions. [. . . ] Page 25 ¤ Open the phone book y or z, Select an entry and dial the number The phone number is dialled and the phone automatically activates the Handsfree" function. If you want to take the call with the receiver, simply lift the receiver from the base. : 1 Select the required quick dial button èor or Dial the number The function is used in more complex telephone services, e. Several numbers stored in the phone book can be dialled when a connection has already been made. It is also possible to combine numbers for transfer from the phone book with numbers entered manually. Numbers stored in the phone book can be chained and transmitted as required. ¤ Open the phone book when a connection has been made y or z, Select the phone book entry and transmit the number The receiver volume can be adjusted to high or low by means of the sliding switch on the side of the receiver. The duration of a call is displayed in minutes and seconds during the call. The ringing volume can be adjusted or switched off by means of the sliding switch on the underside of the telephone. The R-button is used to implement the functions in a private branch exchange or the supplementary services offered by your telephone network provider, . The Recall time can be adjusted as required using the sliding switch on the underside of the telephone. The telephone can be operated in analogue exchanges (Pulse mode) as well as new, digital exchanges (Tone mode). Thirty-two phone numbers can be stored in the phone book together with the associated names. S Always enter the area access code with the phone numbers so that the telephone can also assign incoming local calls to a phone book entry. S When the memory capacity of the phone book is used up, the message MEMORY FULL appears when an attempt is made to store another number. To skip to the required phone book entry directly, enter the first letter of the corresponding entry. The digit keys are also labelled with letters for the entry of the respective letters. Pressing the respective key the necessary number of times enables capital letters and digits to be entered. 1 Space C Delete *, # or 0 Special character y or z Move the cursor To enter the same letter twice, press the button to enter the letter. ¤ Open the phone book Initiate the save process and confirm Enter the phone number (max. 16 letters) and confirm it Open the phone book Select a phone book entry Initiate the editing process and confirm Change the phone number and confirm Change the name and confirm SAVE ?Deleting entries from the phone book Deleting a single entry y or z C DELETE ? [. . . ] in the case of complaints , we reserve the right to repair or replace defect parts or provide a replacement device. Rights to compensation in the case of damage are excluded where there is no evidence of intent or gross negligence by the manufacturer. If your equipment shows signs of defect during the period of guarantee, please return it to the sales outlet in which you purchased the AUDIOLINE equipment together with the purchase receipt. All rights to claims under the terms of guarantee in accordance with this agreement must be asserted exclusively with regard to your sales outlet. [. . . ]