User manual AUDIOLINE TAB938

[. . . ] 46 Dialling and storing telephone numbers when using on private exchanges . Batteries Do not use any other rechargeable batteries, as these could possibly lead to a short circuit. When changing the battery, always use four new Typs AAA/LR03 Alkaline 1, 5 V batteries. Do not dispose of old or faulty batteries with the normal household waste. [. . . ] If this function is available on your line, the display shows you the caller's telephone number while the telephone is ringing. The display reports the following information when there is no telephone number available. If the message KEINE NUMMER appears in the display, the number has only been partially or incorrectly received. If the message PRIVAT appears in the display, the caller has suppressed the transmission of his telephone number or it was not possible to transmit the number. Your telephone will show the number in the display if your telephone provider offers this service. If this service is not available, incoming calls will not be shown in the display. In your absence, all calls will be saved in a caller list with date and time. When the list is full, the oldest number is always deleted from the list. If calls are registered during your absence, this will be indicated in the display by the message NEW and the indicator light for new calls will flash. Note: The new calls display is not dependent on the calls recorded on the answering machine. Calls will also be stored in the caller list even where no message has been left on the answering machine. Total number of numbers stored Number of new numbers stored You can page through the caller list using the Jogdial. When all newly recorded numbers have been checked, the new call indicator light goes off and the NEW indicator in the display shows "0". If no button is pressed within 30 seconds, the caller list is no longer displayed and the display shows the current time and date once more along with the number of telephone numbers stored in the caller list and the number of newly stored telephone numbers. Dialling a telephone number directly from the caller list If you want to change to using the receiver, simply lift the receiver. Before dialling, your telephone compares the country and local dialling codes of the number selected with your location (country + local dialling code). If you have entered your country and local dialling code during installation, the appropriate numbers will not be dialled if this is a number from within your country or local network. Storing telephone numbers from the caller list in the phone book Select the telephone number from the caller list that you want to put into the phone book by using the Jogdial. Enter the first letter and move the cursor one position to the right by means of the Jogdial. Enter the whole of the name in this manner and confirm with number will now be stored in the phone book. Deleting telephone numbers from the caller list Select the telephone number from the caller list that you want to delete by using the Jogdial. The number will be deleted and the Now press the display will now show another number from the caller list. [. . . ] To do this, first listen to the messages and then delete individual messages or all messages. The telephone has a special circuit working on the basis of induction for transmitting speech to hearing aids. 1 Telephone Remove all extra telephone equipment and connect only the telephone directly to the telephone socket. If the fault is still present, connect another telephone (if available) to the telephone socket. [. . . ]