User manual AUDIOLINE STUDIO 80

[. . . ] If you should have any questions, please contact our Service Department on the Hotline number 0180 5 00 13 88 (costs Telekom by printing: 12ct/min). Under no circumstances open the unit yourself and do not try to carry out your own repairs. Intended use - This telephone has been designed for use on an analogue telephone line (PSTN) within Germany. However, no guarantee can be accepted for trouble-free operation on all telecommunications terminal equipment connections due to the differences between the different telecommunications network operators. [. . . ] Your AUDIOLINE telephone supports the most important DEUTSCHE TELEKOM added value functions (e. "9" or "0") in order to obtain a dialling tone for an outside line on the extension. With some, older private exchanges, it takes some time before the dialling tone can be heard. Especially for these private exchanges, an automatic pause can be inserted after connecting to the outside line so that you can dial directly without waiting for the dialling tone. Entering a pause when dialling manually once between the number for the outside line and the actual Press the redial button telephone number. After connecting to an outside line your telephone will wait for 3 seconds before dialling the actual telephone number. The integral answering machine can store up to 12 minutes of incoming messages digitally during your absence. For your greeting message, you can use two pre-recorded standard messages or you can record two messages of your own. If you have not recorded your own greeting, the standard greeting will answer automatically. Before working with the answering machine, you should set the day and time announcement. The message indicator light will illuminate when the answering machine is switched on. Note: When you switch on the answering machine, you will hear the current greeting with which the machine will answer. If the caller speaks for longer, a signal tone sounds and the call will be cut off. If there is a pause of more than 7 seconds during recording, the call will automatically be terminated with a signal tone. If the memory capacity for new messages is exhausted, the answering machine automatically switches to announcement no. Your requirements by repeatedly pressing the You will hear a dual signal tone once the minimum or maximum setting is reached. 4 Delaying acceptance of calls Here, you can set up after how many rings incoming calls are to be accepted. the setting for the toll-free remote pre-access facility is also available. Note: You can check the setting at any time by briefly pressing the 8. The in-built loudspeaker in the base station makes it possible to listen to incoming calls without accepting the call. If you do not want to listen in to the incoming calls, turn the volume on the base station down to zero. 6 Interrupting the answering machine You can personally intervene at any time while the answering machine is playing back your greeting or the caller is dictating his message. [. . . ] Select the REGISTER menu with Select the SELECT BASE menu with The display will now show all base stations that the handset is already logged on to. Select the required base station to which the handset is to be switched by means of the number pad. With this setting, the handset changes automatically to the nearest base station when the connection to the current base station becomes too weak. If you have problems with your telephone, please check the following points first. [. . . ]