User manual AUDIOLINE SPRINT180

[. . . ] 1 Intended use The telephone is suitable for telephoning within a public telephone network system. Under no circumstances open the device or complete any repair work yourself. 2 Installation location The telephone is designed for use indoors in rooms with a temperature range from 10 °C to 30 °C. The base station should not be used in rooms exposed to moisture, such as bathrooms or laundries. [. . . ] 2 Information on entering names The digit keys are also labelled with letters for the entry of the respective letters. Pressing the respective key the necessary number of times enables capital letters and digits to be entered. Press: 1 x button /, 2 x button §, 1 x button (, 2 x button §, 3 x button / S To enter a space, press 1 once. S To enter the same letter twice, press the button to enter the letter. 3 ©, G ©, O Entering phone numbers in the phone book Enter the phone number (max. , G Select the phone book entry and press the phone book button , ©, O Edit the name and confirm , ©, O Edit the phone number and confirm 5. 7 Deleting all entries from the phone book G, 2 sec Open the phone book and press the Delete button ALLE?If this function is provided by your telephone service, the number of the caller appears in the display when the telephone rings. If the caller's number is stored in the phone book, the name appears in the display instead of the phone number. If the caller has suppressed transmission of their phone number, the message PRIVAT appears in the display. In this case, the phone number is not displayed and, as a result, is not stored in the calls list. Caution: The caller number display function is an optional service offered by telephone network providers. The display of the date and time is not transferred by all telephone network providers. Transfer of the phone number or the date and time is not always possible either in some private branch exchanges. The dealer where you purchased the exchange can provide information as to whether the telephone will work properly with the exchange. 3 Entering a dialling pause In the case of private branch exchanges, it is necessary to dial a specific number (e. 9" or 0 ) in order to obtain the dialling tone for an outside line. When using some older private branch exchanges, it takes a little time before the dialling tone becomes audible. Particularly in the case of such private branch exchanges, it is possible to insert an automatic pause after the number for the outside line so that the number can be dialled in a continuous process without having to wait for the dialling tone. Entering a dialling pause 2 sec P After dialling the number for the outside line, the telephone then waits 3 seconds before dialling the actual phone number. The pause can also be entered with the phone numbers in the phone book. , O Select the setting option and confirm Move one level back 2 sec Activate Standby mode Every programming process is automatically cancelled if there is no input within 30 seconds. [. . . ] 2 Changing the remote access security code Proceed as follows to change the security code: 2 sec B Press button z oder y, B Change 1st digit and confirm z oder y, B Change 2nd digit and confirm z oder y, B Change 3rd digit and confirm 10. 3 Playing back messages via remote access © Dial your own phone number ¹ Button *, © Press during the outgoing message and enter the PIN code If an incorrect entry is made, the outgoing message is repeated. If the security code is entered incorrectly three times, the line is automatically disconnected. Button 2 Play back message Other functions can be executed via the remote access system within the following 8 seconds. [. . . ]