User manual AUDIOLINE OSLO 580

[. . . ] 1 Intended use The telephone is suitable for telephoning within a public telephone network system. Under no circumstances open the device or complete any repair work yourself. 2 Installation location The telephone is designed for use indoors in rooms with a temperature range from 10 °C to 30 °C. The base station should not be used in rooms exposed to moisture, such as bathrooms or laundries. [. . . ] Pressing the button calls in further information on the phone number displayed, if required: S If the phone number is longer than 12 digits, the remaining digits are displayed. S Displays the date and time of the call if this data was transferred from the caller. 2 Dialling numbers in the calls list To call back a number displayed in the calls list directly, press the button. 3 Storing numbers from calls list in the phone book A phone number stored in the calls list can be transferred directly to the phone book. 2) If the name already exists in the phone book, an acoustic signal is issued {í} and the selected phone number reappears in the display. 4 Deleting a phone number from the calls list , y or z Select a phone number , Delete ?5 Deleting all phone numbers from the calls list , y or z Open the calls list 3 sec , Delete All Initiate the deleting process and confirm The telephone can be used to transfer short text messages (SMS = Short Message Service) with up to 160 characters via the conventional telephone network provided the following conditions are fulfilled: S The CLIP function is enabled for your telephone connection (refer to Section 9). If an SMS is sent to another connection in the conventional telephone network which is has no SMS service or cannot receive texts, the message is automatically provided as a voice message. Sending SMS messages is not available for Call-by-Call connections at present. Contact your telephone network provider for detailed information on transferring SMS messages via the conventional telephone network. If you want to change to a different provider, please contact our Service Hotline. If you want to send SMS text messages from a private branch exchange extension, it is necessary to store the number for an outside line for your PBX in the handset preceding the Service Center number. When you select writing a new SMS text, the previous text initially appears in the display. Delete the old text by pressing the button before beginning to write the new one. This acoustic signal can be deactivated, if necessary (refer to Section 7. When all the memory locations are full, the oldest entry is deleted from the respective directory when a new SMS text message is received. This function enables SMS text messages, to which only you have access, to be received and sent. The SMS mailbox can only be used when the telephone network provider supports the facility. Therefore, ask your telephone network provider with respect to setting up your personal SMS mailbox. All the telephone answering machine (TAM) functions can be operated via the handset and also directly on the base station. 3 Number of rings (answering delay) You can select from 2 to 9 rings or choose the Tollsaver setting for the pre-remote access function. The pre-remote access function enables contacting the answering machine free of charge to determine whether any new messages have been left. [. . . ] 1 Service hotline Should problems arise with the telephone, please refer to the following information first. Faults No telephone calls possible Corrective measures - - - - - Connection is disturbed or cut off Dialling not possible The system no longer responds or is in an undefined state The charging control lamp does not light up - - - - The telephone line is not connected properly or is defective. Test whether the telephone connection is in order by using another telephone. The power adaptor plug is not plugged in or there is a complete power failure. [. . . ]