User manual AUDI A2 QUICK REFERENCE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AUDI A2. We hope that this AUDI A2 user guide will be useful to you.


AUDI A2 QUICK REFERENCE GUIDE: Download the complete user guide (325 Ko)

Manual abstract: user guide AUDI A2QUICK REFERENCE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 2 Unlocking button for tailgate Press the button for at least 1 second. 3 Locking button The turn signals flash once to confirm that the tailgate is properly closed. Note: Press and hold unlocking button of remote control to open all electric windows. Press and hold locking button of remote control to close all electric windows. Category 0 Category 1 Category 2 Category 0 or 0+: For babies up to about 9 months/10 kg and infants up to about 18 months/ 13 kg. [. . . ] 3 Seat height The seat height is adjusted by pulling or pushing the lever. Tug the belt to check that the catch is engaged properly. Rear seats The luggage area can be extended when extra space is required; there are several alternatives: Changing angle of rear backrest Pull up the handle 1 and push the backrest forwards until the handle 1 clicks back into place. Folding down rear backrests Pull up the handle 1 and fold down the backrest. Folding down rear seat Open the rear doors. Press the top of the backrest 2 down firmly in the direction indicated (arrow). Pull out the rod 4 located under the seat and insert in the retainer 5. Removing rear seats Open the rear doors. Press the top of the backrest 2 down firmly in the direction indicated (arrow). Pull the release handle 3 in the direction indicated (arrow) and lift up the seat 6. Installing rear seats Engage the retainers on the seat 7 in the front mountings 8. Then press the seat into the rear mountings 9 so that it engages securely. Setting up rear seats and backrests Fold back the seat and backrest until they engage securely. Make sure that the outer rear seat belts are located in the belt guides, so that they are not trapped in the backrest catch. Instruments and warning/indicator lamps Press the button briefly with the ignition on and the vehicle stationary. · To check the auto-check control display Press the button twice with the ignition on. · To call up driver information Press the button if one of the red symbols flashes. · To activate mileage recorder display and clock Press the button when the ignition is off. · To set speed warning Press the button briefly when the desired speed is indicated on the speedometer. · To set the time/date Keep pulling the button briefly until the desired display appears. 8 Display: · Warning symbols and autocheck control OK No faults detected · 1 2 Rev counter Warning and indicator lamps Electronic power control (for engine)1) or Glow plugs (on diesel models)1) Economy mode or Trailer turn signals Side lights/headlights Traction control system (ASR) or Electronic stability program (ESP) Electronic immobilizer Main beam headlights Turn signals, hazard warning lights P 3 4 5 6 7 · Fault in engine management system1) Airbag system1) Anti-lock brake system1) Handbrake engaged Alternator1) Seat belt reminder Coolant temperature gauge Fuel gauge Speedometer Clock/Date Control button: To check distance to next service Fault in brake system Coolant temperature too high/coolant level too low Engine oil pressure too low If one of the red symbols lights up while you are driving, stop the car, switch off the engine and refer to the Owner's Manual. BREMSBrake light faulty1) LICHT / Bulb failure: dipped headlights or rear lights1) Brake pads worn1) Washer fluid level low Fault in power steering Fuel level low Battery voltage too high or too low1) Check engine oil level Engine oil sensor faulty1) Speed warning 1 or 2 (km/h or mph) Door or tailgate not shut MIN SENSOR On-board computer Instantaneous fuel consumption km Fuel range h Driving time ø100Lkm Average fuel consumption ø km/h Average speed · Outside temperature · Radio/telephone information · Navigation/telematics information l/100 km Selector lever positions on vehicles with automated manual gearbox · Service indicator Shortly before a service is due, the display will briefly show the word Service, together with the number of miles/km until the service is due. 9 Reset button for trip recorder 10 Mileage recorder Top display: trip recorder Bottom display: total mileage · 1) If one of these warning symbols lights up while you are driving, please take the vehicle to an Audi workshop straightaway. Filling the tank Releasing the tank flap Press the switch (with the filler pump symbol) on the driver's door pillar to release the fuel filler flap. [. . . ] · Do not move the selector lever to positions STOP or R when the vehicle is moving. · For maximum acceleration in the gears, press the accelerator pedal right down beyond the point of resistance to activate the kick-down. Manual gear selection (Tiptronic) The Tiptronic program enables you to change gear manually. Move the selector lever to the left out of position D into the centre of the shift gate. Press the selector lever forwards briefly to shift up a gear, or push the lever back to shift down a gear. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AUDI A2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AUDI A2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.