User manual AT&T E5927

[. . . ] User's manual 5. 8 GHz Cordless Telephone/Answering System E5926/E5927B/ E5937B/E5947B/E1937B with Caller ID/Call Waiting Congratulations on your purchase of this AT&T product. Before using this telephone system, please read Important safety instructions on pages 51 to 53 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1 (800) 222-3111 In Canada, call 1 (866) 288-4268 or visit our web site at www. telephones. att. com Model #: Product name: Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: E5926/E5927B/E5937B/E5947B/E1937B 5. 8GHz cordless telephone/answering system IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local telephone service provider. Caller ID with call waiting lets you see who is calling before answering the phone, even when you're on another call. Contact your telephone service provider if: · You have both caller ID and call waiting, but as separate services (you may need combined service). [. . . ] Press twice to hear previous message (or hold down to slow message playback). · Press PLAY/STOP to stop playback. To delete all old messages To delete all old messages, press and hold DELETE while the phone is idle (not during a call, or during message playback). New or unheard messages cannot be deleted. 35 Answering system operation Recording and playing memos Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if others in your household use the answering system. Press STOP when you are done. " Speak into microphone. Elapsed recording time (in seconds). Press to stop recording. 1. 2. Press REC/MEMO. Elapsed time (in seconds) is shown in the message window as you record. Press PLAY/STOP to stop recording. To play back a memo Press PLAY/STOP to hear messages and memos (see page 35 for other options). Microphone 3. (Play/Stop) "Recorded " then beep (Memo has been recorded). 36 Answering system operation Message counter displays The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter Message counter displays 0 1-98 No messages. Number of messages/memos, or message number currently playing (flashes if you have new messages). Elapsed time while recording a memo (see page 36) or announcement up to 90 seconds (page 32). Displayed for one second when any answering system setting is turned on or off. Current number of rings while setting (see page 34). 10-99 1-8 1-99 (counting) 99 (flashing) F (flashing) CL (flashing) A --- (flashing) On (or) OF 02, 04, 06, tS 37 Answering system operation Remote access 1. When system answers, enter a two-digit remote access code (19 unless you have changed it). A two-digit security code is required to access your answering system from any touch-tone phone. This code is 19 by default; see page 34 to change it. Play all messages Press to hear all messages. 1 2 Play new messages Press to hear new messages. Press 3 twice to delete all old messages while in remote access idle mode (message not being played). Press during the beginning of the day and time announcement to go back to the previous caller's message. Hang up to end call and save all undeleted messages. Delete the message 3 33 4 Repeat or go back Stop 5 NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically. Skip to next message 6 Review announcement #7 Record announcement *7to begin recording 5to stop recording Record memo 8to begin recording 5to stop recording Review remote access code #9 *9 Press # 9 to review remote access code. Change remote access code Press * 9 to change remote access code, then enter desired remote access code from 10-99. 38 Answering system operation Remote access Help menu *5 0 0 Press to hear list of features & commands. Enter your access code, then press 0 to turn it on. Turn system off Turn system on 39 Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons Ringer off. Battery charging (animated display). HANDSET 1 MUTE NEW 11/23 Low battery (flashing); place handset in base or charger to recharge. MUTE NEW 10:01 AM Microphone is muted. Missed and un-reviewed calls. Handset alert tones Two short beeps Four short beeps Two beeps Press VOLUME keys while the volume levels are already at limits. [. . . ] The limited warranty period for the product extends for ONE (1) YEAR from the date of purchase. If AAT repairs or replaces a materially defective product under the terms of this limited warranty, this limited warranty also applies to repaired or replacement products for a period of either (a) 90 days from the date the repaired or replacement product is shipped to you or (b) the time remaining on the original one-year limited warranty, whichever is longer. 56 Appendix Limited warranty 4. This limited warranty does not cover: · product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or · product that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of AAT; or · product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or · product to the extent that the problem is caused by use with non-AAT accessories; or · product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or · product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or · product returned without valid proof of purchase (see 6 below); or · charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. To obtain warranty service in the United States of America, call 1-800-222-3111 (In Canada, please dial 1-866-288-4268) for instructions regarding where to return the product. [. . . ]