User manual ASUS Z9PE-D8 WS

[. . . ] Operation is subject to the following two conditions: • • This device must accept any interference received including interference that may cause undesired operation. This device may not cause harmful interference, and This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. [. . . ] Unspecified option will not modify any BMC network parameters during BIOS phase. Configuration options: [Previous State] [Static Mode] [DHCP Mode] The following items appears only when you set Configuration Address source to [Static Mode]. 7 Event Logs menu The Event Logs menu appears when the ASMB card is not installed on the motherboard. All values changed here do not take effect until computer is restarted. change Smbios Event Log Settings Press <Enter> to change the Smbios Event Log configuration. View Smbios Event Log View System Event Log Press <Enter> to view all smbios event logs. Event Logs Change this to enable or disable all features of Smbios Event Logging during boot. Enabling/Disabling Options Smbios Event Log Erasing Settings Erase Event Log When Log is Full [Enabled] [No] [Do Nothing] Smbios Event Log Standard Settings Log System Boot Event [Disabled] MECI 1 METW 60 Custom Option Log OEM Codes [Enabled] Convert OEM Codes [Disabled] Note: ll values changed here do not take effect A until computer is restarted. All values changed here do not take effect until computer is restarted. Enabling/Disabling Options Smbios Event Log [Enabled] Change this to enable or disable all features of Smbios Event Logging during boot. configuration options: [Disabled] [Enabled] Erasing Settings Erase Event Log [No] Choose options for erasing Smbios Event Log. The number of device items that appears on the screen depends on the number of devices installed in the system. €¢ • To select the boot device during system startup, press <F8> when ASUS Logo appears. ] These items appear only when you connect SATA ODD or hard drive to the SATA ports. CD/DVD ROM Drive BBS Priorities Hard Drive BBS Priorities Network Device BBS Priorities These settings allow you to set the booting order of the SATA devices. 4-48 Chapter 4: BIOS setup Setup Mode [EZ Mode] [Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program. Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. €¢ • To select the boot device during system startup, press <F8> when ASUS Logo appears. The number of device items that appears on the screen depends on the number of devices installed in the system. 9 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. [. . . ] Align and firmly insert the 3Way SLI bridge connector to the goldfingers on each graphics card. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. Align and firmly insert the 4-Way SLI bridge connector to the goldfingers on each graphics card. Connect four independent auxiliary power sources from the power supply to the four graphics cards separately. [. . . ]