User manual ASROCK E35LM1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASROCK E35LM1. We hope that this ASROCK E35LM1 user guide will be useful to you.
Manual abstract: user guide ASROCK E35LM1
Detailed instructions for use are in the User's Guide.
[. . . ] Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identiï¬cation or explanation and to the ownersâ beneï¬t, without intent to infringe. Disclaimer:
Speciï¬cations and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. [. . . ] ASRock E35LM1 Motherboard
9
English
Please note that you must be running on a DHCP conï¬gured computer in order to enable this function. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. EuP stands for Energy Using Product, was a provision regulated by the European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system should be under 1. To meet EuP standards, an EuP ready motherboard and an EuP ready power supply are required. According to Intelâs suggestion, the EuP ready power supply must meet the standard of 5v, and the standby power efï¬ciency should be higher than 50% under 100 mA current consumption. For EuP ready power supply selection, we recommend you to check with the power supply manufacturer for more details. Before you install the motherboard, study the conï¬guration of your chassis to ensure that the motherboard ï¬ts into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components. 1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the chassis. 2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be damaged. Installing a DIMM
Please make sure to disconnect power supply before adding or removing DIMMs or the system components. [. . . ] 1)
Please connect the CPU fan cable to the connector and match the black wire to the ground pin. 1
13
Though this motherboard provides 24-pin ATX power connector, it can still work if you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 13. 8
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive ï¬rst. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASROCK E35LM1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASROCK E35LM1 will begin.