User manual ART POWERMIXIII

[. . . ] ART cessories March 2003 TM Creative audio solutions in cool little boxes. PowerMIX III Three Channel Personal Mixer Problem: How do you connect a CD player, a synthesizer and the line output from a bass amp to a tape deck? [. . . ] b. ) Plug your stereo signal sources into the separate L/R Inputs on channels 1 to 3. It is not recommended that you connect 2 mono sources to any one channel. c. ) Connect the L/R Outputs to the inputs on your mixer, tape deck, PC, etc. e. ) Adjust the channel Pan and Level controls for the desired mix through headphones. f. ) Increase the Master Level control setting as required for optimum signal level and clarity from the recording or PA device (PC, cassette deck, mixer, etc. ). Specifications: · Three input channels each with their own pan and level controls · Three sets of 1/4" left and right unbalanced inputs · The Right inputs may be used for mono signals · A Master Level control regulates all 3 channels · Left and Right unbalanced 1/4" Outputs · The Headphone channel features dual, stereo 1/4" outputs so that two headsets can be connected at once · The Headphone Level control regulates both outputs · Input Impedance: 10k ohms · Output Impedance: 100 ohms · Max. Output Level: +13dB · THD: <0. 005% · Power: 12V DC (Adapter included) · Dimensions: 5. 625 x 3. 75 x 1. 75 inches (143mmx92mmx45mm) · Weight: 1. 3 lbs. [. . . ] (590g) 90 DAY WARRANTY DESIGNED & DISTRIBUTED BY: APPLIED RESEARCH AND TECHNOLOGY · 215 Tremont Street · Rochester, New York 14608 · USA For Customer Service, please call: 585. 436. 2720 · Email: cserve@artproaudio. com · www. artproaudio. com · ART-ARTcs-03/03 [. . . ]