User manual ART MYMONITOR

[. . . ] ART cessories March 2003 TM Creative audio solutions in cool little boxes. MyMONITOR Personal Monitor Mixer Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. [. . . ] (The mixer or another source of phantom power will be required for a condenser mic. ) · XLR Mic Thru connector for connecting MyMONITOR to the mixer's mic input. · 1/4" stereo Monitor In jack accepts the stereo output of a mixer, CD player, tape deck, etc. (A mono source can be connected here, but only one earpiece will work. ) · Mic Level control regulates the mic's headphone level. · Monitor Level control regulates the stereo Monitor inputs level through the headphones. (A friend can listen too. ) Usage: a. ) If you are using the AC power adapter (included), connect the cable to the 12V DC connector and plug the other end into a 120V AC power outlet. Otherwise, a 9V battery (optional) can be installed in the battery compartment. b. ) Set the power switch to the ON position ­ the Power LED will light up. c. ) Connect a low impedance dynamic or condenser mic to the Mic In XLR. [. . . ] g. ) Adjust the Mic Level and Monitor Level controls for the desired mix and volume through the headphones. Specifications: · Battery ON/OFF switch · Power LED · Maximum Input Level: -20dB mic, 40dB Monitor · Output Impedance: 10 ohms · Gain: 15dB 1/4", 50dB XLR · S/N Ratio: 90dB · Power: 12V DC (Adapter included) or one 9V battery · Dimensions: 4. 5 x 2. 75 x 1. 5 inches (112mm x 72mm x 40mm) · Weight: 1. 3lb (590g) 90 DAY WARRANTY DESIGNED & DISTRIBUTED BY: APPLIED RESEARCH AND TECHNOLOGY · 215 Tremont Street · Rochester, New York 14608 · USA For Customer Service, please call: 585. 436. 2720 · Email: cserve@artproaudio. com · www. artproaudio. com · ART-ARTcs-03/03 [. . . ]