User manual ALPINE IVA-D106R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ R EN Mobile Media Station DE IVA-D106R FR ES DIGITAL VIDEO · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] If the rear monitor (connected to the Alpine rear monitor output via the Monitor control lead) is touched, the command is executed regardless of the remote control sensor switch setting. Note, however, that the remote control sensor that has been set takes priority if it has been 5 seconds since last touching the panel. · When an optional DVD changer or DVD player is connected, and the remote control sensor is set to REAR, some onscreen button operations ( [ ] STOP, etc. ) cannot be performed. In this case, set the remote control sensor to FRONT. 37-EN Setting the Navigation Mode When you connect an optional navigation equipment, set it to ON. Setting item: NAV. The settings related to the navigation can not be changed from this unit. Setting the Rear Camera Input With a rear camera connected, rear view video is output to the monitor. Setting item: CAMERA IN Setting contents: OFF / ON OFF: The CAMERA source is not displayed on the VISUAL selection screen. ON: Even if the shift lever is not set to reverse (R), the rear pictures are output by selecting the CAMERA source. Setting the Navigation Interruption With an Alpine navigation system connected to the IVA-D106R, the voice guidance of the navigation system will be mixed with the radio or CD play. Setting item: NAV. MIX Setting content: OFF / ON OFF: The navigation interruption mode is turned off. ON: The navigation interruption mode is on. · By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. · To apply the setting, set to VISUAL "Setting the VISUAL Button" (page 39). Setting the AUX Mode Setting item: AUX IN Setting content: OFF / ON / CAMERA / DVD / GAME / TV / DVB-T / EXT. LEVEL" under "Adjusting the Audio (Adjust the Balance/Fader, Bass/Treble, Loudness, Highpass Filter, Subwoofer, NAV. LEVEL, Defeat)" on page 27 to set the navigation interruption volume level. · The volume level for voice prompts during navigation guidance is set by adjusting the its volume while the prompts are announced. When the announcement finishes, the normal audio volume and the previous audio screen are restored. The voice prompt volume is always at or below the current listening volume. If a navigation announcement cuts in while adjusting the audio level, it always resets to the current level regardless of the audio level setting. · This setting is effective when NAV. IN of SYSTEM list screen is ON. Setting for iPod Connection Set when an optional iPod or an external input device is to be connected. Setting item: iPod Setting contents: AUDIO / VIDEO / AUX+ AUDIO: VIDEO: Input is available for iPod audio (a video compatible iPod is available only for audio input). Set when a video compatible iPod is connected to the iPod (V)/CAMERA connector. If this setting is made, connect the iPod to the Back-up camera by referring to "Connecting Video compatible iPod and Back-up Camera at the same time" (page 78). Set if an optional iPod Direct/RCA Interface cable (KCE-236B) is connected to the iPod direct cable of this unit. A portable player, etc. , with an RCA audio output can be input to the unit. The "iPod" source name on the SOURCE selection screen will not be displayed. · OFF is not displayed when the optional DVD player or DVD changer is connected. [. . . ] Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. Video Output Connector (AUX OUTPUT) (Yellow) Output the video. Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. · This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc. Audio Output Connectors (AUX OUTPUT) RED is right and WHITE is left output the audio. Audio Input Connector (AUX / CAMERA IN) Input video or Back-up camera signal. Digital Output Terminal (Optical) Use when combining fiber optic digital input compatible products. Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Rear Output/Input RCA Connectors It can be used as Rear Output or Input RCA connectors. RED is right and WHITE is left. Fuse Holder (10A) ISO Power Supply Connector Left Rear (+) Speaker Output Lead (Green) Left Rear (­) Speaker Output Lead (Green/Black) Left Front (+) Speaker Output Lead (White) Left Front (­) Speaker Output Lead (White/Black) Right Front (­) Speaker Output Lead (Grey/Black) Right Front (+) Speaker Output Lead (Grey) Right Rear (­) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet) System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. [. . . ]