User manual ALAN MIDLAND G7E XT

[. . . ] In open space, without obstructions and in sight, like for example in mountain, the coverage can be more than 12 Km. Speaker / battery recharge NOTE: The manufacturer, with its effort to constantly improve product quality, reserves the right to change characteristics and features without prior notice. Ignoring these symbols may result in serious problems and/or damage and/or personal injury. Notes such as this one indicate practical advice that we suggest be followed for the optimal performance of the equipment 2. [. . . ] Do not forget therefore, to detach the wall adaptor from the radio as soon as the batteries are charged. Make sure that when you charge the radio, only rechargeable NI-MH batteries should be contained in the battery compartment!It is very dangerous attempting to recharge other types of batteries (for example alkaline or manganese batteries). Batteries which are not suitable to be recharged may leak, explode or even burn and cause damage!Using a different battery charger other than the one specified can cause damage to your device or may even cause explosions and personal injuries. Do not throw batteries into fire or place them near heat as this may cause explosions or personal injuries. Dispose of the batteries according to procedures set out by local regulations. Do not mix old and new batteries or batteries of different types or batteries which have been used in different manners. Press twice MENU [17] until the display shows the channel with the CTCSS tone [9] flashing on the right ("of" default condition). To confirm the setting, press the PTT [11] key or wait for approximately 5 seconds. To deactivate CTCSS tones If you want to operate with no CTCSS code: 1. Press twice the MENU [17] key until the display shows the desired channel and the CTCSS [9] tone blinking on the right. 3 Choosing high or low transmission power Batteries are drained more quickly during transmission. In order to extend the battery life you can select the low power when transmitting over short distances. If you want to transmit a longer distance repeat the above procedure to select the high power. When the batteries are in good conditions, high power is 500mW, whereas low power is 10mW. A low battery level during transmission will reduce the performance of your device. 4 VOX function Midland G7E XT enables hands free conversations through VOX function. The sensitivity of VOX function can be adjusted in 2 different levels. To disable the VOX function follow the instructions above and select option oF. 5 Vibra-Call function Midland G7E XT is equipped with the "Vibra-Call" feature, which provides a silent alert for incoming calls. Press the MENU [17] button for 5 times, until the display shows [6]; 2. [. . . ] By excluding the squelch you will avoid listening the communication "chopped" by the squelch. Press the scroll buttons / [19] to scroll up or down the PMR channels till you select the desired channel. 1 Simbols used For ease and convenience of use, this manual uses symbols to highlight urgent situations, practical advice, and general information. Exclamation marks such as this one indicate a crucial description regarding technical repairs, dangerous conditions, safety warnings, advice, and/or other important information. [. . . ]