User manual AEG-ELECTROLUX ZCS2000W

[. . . ] Accessories and safety precautions Before starting Getting the best results Replacing the dust bag, s-bag® Replacing the motor filter and exhaust filter Cleaning the hose and nozzle Troubleshooting and consumer information 6 8 10 12 12 14 16 Classic Silence should only be used by adults and only for normal vacuuming in a domestic environment. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. [. . . ] If you have a carpet/hard floor nozzle with two pedals ­ press the pedal on the right (3) to vacuum up animal hair, etc. Using the power nozzle 5 6 7 8 (Requires an Classic Silence equipped with a power socket. The power nozzle is delivered only with certain models, or could be bought as an accessory. 12 The power nozzle starts operating when the vacuum cleaner is switched on. Note: Do not use the power or turbo nozzle on skin rugs, rugs with long fringes or a pile depth exceeding 15 mm. to avoid damaging the carpet , do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the vacuum cleaner immediately after use. REPLACING THE DUST BAG, S-bag® 1 The dust bag, s-bag® must be replaced latest when the indicator window is completely red. this automatically seals the s-bag® and prevents dust leaking out. Insert a new s-bag® by pushing the cardboard right into the end of the groove in the insert. attach the insert by placing it on the back pegs in the bag compartment. Replace the s-bag® even if it is not full (it could be obstructed). Be sure to use only an original Electrolux dust bags, s-bag® Classic or s-bag® Clinic. Should be done with every 5th replacement of the dust bag, s-bag® 6 7 8 Fold down the carrying handle. [. . . ] The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ]