User manual AEG-ELECTROLUX WASL3T101

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX WASL3T101. We hope that this AEG-ELECTROLUX WASL3T101 user guide will be useful to you.


AEG-ELECTROLUX WASL3T101 : Download the complete user guide (11791 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX WASL3T101 (12445 ko)

Manual abstract: user guide AEG-ELECTROLUX WASL3T101

Detailed instructions for use are in the User's Guide.

[. . . ] ⷠIf the appliance is installed on carpeted floor, ensure that the carpet does not obstruct any ventilation ducts located at the base of the appliance. ⷠThe appliance must be equipped with an earthed power plug which conforms to regulations. ⷠBefore connecting your appliance to the power supply, carefully read the instructions in the chapter entitled "Electrical connection". [. . . ] Selecting the spin speed pushbutton to change Press the "Spin" the spin speed, if you want your washing to be spun at a different speed to the one selected by the appliance. At the end of the programme, if you have seor "Night silence lected "Rinse hold" , you then need to select a " Spin " plus" or " Drain " programme to finish the cycle and empty the water. Night silence plus : the cycle contains no spin and ends with a rinse hold. Selecting options You must select the different options after selecting the programme and before presspushbutton (see ing the "Start/Pause" "Programme table"). If one of the options is not compatible with the selected programme, "Rinse plus" option The washing machine will add one or more rinses during the cycle. This option is recommended for people with sensitive skin and in soft water areas. Permanent : Hold down the "Prewash" and "Delay Start" pushbuttons for a few seconds. "Delay start" This option allows you to delay the start of a wash programme by 30, 60, 90, 2 hours to 20 hours. You can change or cancel the delayed start time at any time before you press the "Start/ pushbutton, by pressing the "DePause" lay start" pushbutton again (0' indicates immediate start). If you have already pressed the "Start/ pushbutton and you want to Pause" change or cancel the delayed start, proceed as follows : · To cancel the delayed start and start the cycle immediately, press "Start/Pause" and then "Delay start" . To change the timer delay period, you position must go through the "Stop" and reprogramme your cycle. If you need to open it, you must first pause the appliance by pressing the pushbutton. After closing "Start/Pause" the lid again, press the "Start/Pause" pushbutton. Type of fabric For heavy soiled items For normal soiled items For daily soiled items For slightly soiled items For very slightly soiled items For items used or worn for a short time For refreshing items only For refreshing a very few items only Start of the programme pushbutton to Press the "Start/Pause" start the cycle ; the corresponding light will apcome on green and the symbol pears on the display (door locked). It is normal for the programme selector to remain stationary during the cycle. Warming up During the cycle, the symbol comes on when the appliance is reaching the right temperature. Interrupting a programme Adding washing during the first 10 minutes pushbutton : Press the "Start/Pause" the corresponding light will flash green while the appliance is paused. Modifying the programme in progress Before making any changes to the current programme, you need to pause the washing machine by pressing the "Start/Pause" pushbutton. [. . . ] The wash cycle is much too long : The washing machine stops during a wash cycle : The lid doesn't open at the end of the cycle : The E40 error code appears in the display2) and the "Start/Pause" pushbutton flashes red 3) : The E20 error code appears in the display2) and the "Start/ Pause" pushbutton flashes red3) : The E10 error code appears in the display2) and the "Start/Pause" pushbutton flashes red3) : The EF0 error code appears in the display2) and the "Start/Pause" pushbutton flashes red3) : Softener runs directly into the drum when filling the dispenser box: The temperature inside the drum is too high, · The anti-flooding security system has been activated, please proceed as follows : - close the water inlet tap, - empty the appliance for 2 minutes before unplugging, - call the after-sales service. 2) On some models, the auditable signals can sound 3) After solving any problems, press "Start/Pause" pushbutton to restart the interrupted programme. Only use detergents and additives designed for use in a washing machine. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX WASL3T101




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX WASL3T101 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.