User manual AEG-ELECTROLUX TY58TSCN

[. . . ] Make sure that the ventilation space of 5 mm, between the worktop and the front of the below unit, is free. Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. Keep children and pets away from the appliance when it operates or when it cools down. [. . . ] Each Teppan Yaki grill surface is unique because they are made by hand and grounded by grinding specialists. Differences in the grinding pattern are normal and do not cause problems in how the appliance operates. The groove around the edge: ­ Decreases the temperature of the installation surfaces, which lets you install the cooking surface into different types of kitchen worktops. ­ Absorbs some of the expansion of the heated cooking surface through its indentation. ­ Collects small food remnants and liquids which you can easily remove after the operation. The necessary temperature can be kept constant by the thermostat with a readable temperature setting. This prevents overheating of the food and permits lowfat cooking that keeps the nutritional values of the food. The food is heated directly on the cooking surface, with or without oil. Description 3 step residual heat indicator: continue cooking/keep warm/residual heat. Use the Count Down Timer to set how long the roasting zone operates for only this one time. The selection of Timer function is possible for roasting zones that are active and the heat setting is set. To set the roasting zone: touch again and again until the indicator of a necessary roasting zone comes on. to activate the Count Down Timer: touch of the timer to set the time ( 00 - 99 minutes). When the indicator of the roasting zone starts to flash slow, the time counts down. You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc. If you set the temperature, the display flashes until the roasting zone reaches the temperature. When the timer countdown comes to an end, the sound operates and 00 flashes. The Bridge function connects two roasting zones to have them operate as one. This function is active automatically when you activate the appliance. Use the Count Up Timer to monitor how long the roasting zone operates. [. . . ] When the appliance is dry, rub the roasting surface with some cooking oil. Possible cause Remedy Activate the appliance again and set the heat setting in less than 7 seconds. You put something on one Remove the object from or more sensor fields. The electrical system of the house in order to disconnect the appliance from the electrical supply for some time. [. . . ]