User manual AEG-ELECTROLUX L76670FL

[. . . ] L 76470 FL L 76670 FL EN User manual 2 www. aeg. com CONTENTS 1. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www. aeg. com Register your product for better service: www. aeg. com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. aeg. com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] Set and start the correct programme for the type of laundry and soil. Open the appliance door. Close the door. ENGLISH 15 Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. 9. 2 Filling the detergent and additives The detergent compartment for the prewash phase, the soak programme and for the stain function. Add the detergent for prewash, soak and stain remover before the start of the programme. If you use a liquid detergent, put it immediately before you start the programme. Flap for powder or liquid detergent Turn it (up or down) in the correct position to use powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. 16 www. aeg. com Check the position of the flap 1. Pull out the detergent dispenser until it stops. Press the lever down to remove the dispenser. 3. To use powder detergent, turn the flap up. 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid detergent than the limit showed in the flap. Make sure that the flap does not cause a blockage when you close the drawer. 3. 9. 3 Setting and starting the programme 1. The indicator of button 4 flashes with red colour. The display shows the default temperature and spin speed. To change the temperature and/or the spin speed, press the related buttons. The indicator of the set function comes on or the display shows the related symbol. ENGLISH 17 5. Press button 4 to start the programme. The drain pump can operate for a short time when the appliance fills water. 9. 8 Cancel the delay start 1. The washing programme continues. 9. 9 Open the door While a programme or the delay start operates, the appliance door is locked. To open the appliance door: 1. 9. 5 Cancel a programme 1. Press button 1 to cancel the programme and to deactivate the appliance. If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. If you deactivate the appliance, it is necessary to set the programme again. 9. 6 Change a function You can change only some functions before they operate. 1. Press button 4 . Change the function set. 9. 7 Set the delay start 1. Press button 5 again and again until the display shows the number of minutes or hours. Press button 4 , the appliance starts the countdown of the delay start. Before you press button 4 to start the appliance, you can cancel or change the set of the delay start. 9. 10 At the end of the programme • The appliance stops automatically. [. . . ] Follow the instructions supplied with the kit. 13. 2 Unpacking 1. Use the gloves. Remove the polystyrene packaging materials. ENGLISH 27 4. Remove the internal film. 5. Open the door and remove all the items from the drum. 6. Put one of the polystyrene packaging elements on the floor behind the appliance. Pull up the appliance in vertical position. 1 2 28 www. aeg. com 9. Remove the power supply cable and the drain hose from the hose holders. 10. Put the plastic caps in the holes. You can find these caps in the user manual bag. – We recommend that you keep the packaging and the transit bolts for when you move the appliance. [. . . ]