User manual AEG-ELECTROLUX FAV50460U

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX FAV50460U. We hope that this AEG-ELECTROLUX FAV50460U user guide will be useful to you.


AEG-ELECTROLUX FAV50460U : Download the complete user guide (754 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX FAV50460U (752 ko)
   AEG-ELECTROLUX FAV50460U (751 ko)
   AEG-ELECTROLUX FAV50460U (790 ko)

Manual abstract: user guide AEG-ELECTROLUX FAV50460U

Detailed instructions for use are in the User's Guide.

[. . . ] 94 MACHINE SETTINGS TECHNICAL DATA SERVICE 95 96 97 Subject to change without notice In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. It is dangerous to alter the specifications or attempt to modify this product in any way. [. . . ] This might cause heat built-up which would interfere with the operation of the appliance. The appliance must therefore not be installed on floors which are not resistant to high temperatures. When operating the tumble dryer, the room temperature must not be lower than +5°C and higher than +35°C, as it may affect the performance of the appliance. The appliance must not be installed behind a lockable door, a sliding door a door with a hinge on the opposite side to that of the appliance in such a way that a full opening of the tumble dryer is restricted. Details on mains voltage, type of current and the fuses required should be taken from the type plate. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center. A B Unscrew hinge A from the front of the appliance and take off the loading door. To do this, inB A sert a thin screwdriver into the slots as shown in the illustration, push downwards slightly and pry out the cover plates. Use an appropriate tool and exert pressure to unfasten locking block C from the snapon fixture, take out and re-insert on the other side having rotated the block through 180°. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite side and screw down. preparing laundry · To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties or ribbons (e. The child lock can be activated or deactivated by holding ­ Before programme is started: Appliance cannot be used ­ After programme is started: Programme in operation cannot be changed The icon appears in the display to indicate that the child safety device is activated. The child safety device is not deactivated once the programme comes to an end. If you want to set a new programme, you must first deactivate the child safety device. To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF (AUS) and then reset the programme. The programme can no longer be changed directly once the programme has started. The drying programme is not however affected by this (laundry protection). If the BUZZER (SIGNAL) button has been pressed, an acoustic signal sounds intermittently for about one minute. The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming. To ensure that the dryer works perfectly, the fluff filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle. [. . . ] It is best to use a brush or to rinse thoroughly with a hand-held shower. Replace heat exchanger and lock into place (turn both lock washers outwards until they snap into place). Use a soft detergent to clean the inner side of the drum and the drum blades. The minerals from the water or cleaning agents can collect on the inner surface of the drum. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX FAV50460U




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX FAV50460U will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.