User manual AEG-ELECTROLUX EWS11066EW

[. . . ] However, as manufacturers, we feel it is our duty to provide the following safety notes. · It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. · You MUST read them carefully before installing or using the appliance. [. . . ] For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. 12 electrolux Mould stains: treat with bleach, rinse well (whites and fast coloureds only). Grass: soap lightly and treat with bleach (whites and fast coloureds only). Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and dab the stain. Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Ink: depending on the type of ink, moisten the fabric first with acetone1), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. At the end of this time the machine will stop automatically with water left in the tub. Before starting a new washing phase, it is necessary to empty out the water by: · Draining only : turn the programme selector dial to draining programme (press the button 8 ). · Draining and spinning : turn the programme selector dial to the spinning programme, reduce the spin speed by pressing the relevant button, and then press button 8 . This programme cannot be used for very delicate fabrics as silk or wool. Pour the detergent for the soak programme into the appropriate compartment. At the end of the soak (after having emptied out the water) you can select the washing programme (firstly turn the programme selector dial to O , then to the programme and press the button 8 ). SOFTENER Rinse with fabric softener if needed Spin at the maximum speed Max. load 6 kg With this programme it is possible to rinse and spin cotton garments which have been washed by hand. load 6 kg For emptying out the water of the last rinse in programmes with the option selected, which makes the programme finish with water left in the tub. load 6 kg Separate spin for hand washed garments and after programmes with the option selected, which makes the programme finish with water left in the tub. You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun. [. . . ] Do not use the hose from your previous machine to connect to the water supply. The other end of the inlet hose which connects to the machine can be turned as showed in the picture. Angle the hose to the left or right depending on the position of your water tap. Water inlet Warning!Connect the water inlet hose supplied with the machine to a tap with a 3/4" thread. [. . . ]