User manual AEG-ELECTROLUX EN3409AFW

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EN3409AFW. We hope that this AEG-ELECTROLUX EN3409AFW user guide will be useful to you.


AEG-ELECTROLUX EN3409AFW : Download the complete user guide (3533 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EN3409AFW (3531 ko)
   AEG-ELECTROLUX EN3409AFW (3531 ko)

Manual abstract: user guide AEG-ELECTROLUX EN3409AFW

Detailed instructions for use are in the User's Guide.

[. . . ] The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged. If the refrigerant circuit should become damaged: ­ avoid open flames and sources of ignition ­ thoroughly ventilate the room in which the appliance is situated · It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. [. . . ] ⷠBefore using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brandnew product, then dry thoroughly. ⷠDo not use sharp objects to remove frost from the appliance. Never use a hair drier or other heating appliances to speed up defrosting. Excessive heat may damage the plastic interior, and humidity could enter the electric system making it live. For electrical connection carefully follow the instructions given in specific paragraphs. It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. ⷠAdequate air circulation should be around the appliance, lacking this leads to overheating. Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn. ⷠThe appliance must not be located close to radiators or cookers. ⷠMake sure that the mains plug is accessible after the installation of the appliance. Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. When the compressor switches on or switches off, you will hear a faint "click" of the temperature regulator. This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm. to remove the frost , follow the instructions below: · Pull out the plug from the wall socket or switch off the appliance · Remove any stored food, wrap it in several layers of newspaper and put it in a cool place · remove the freezer drawers · Put insulating material around the drawers, e. Defrosting can be accelerated by placing bowls with hot water (not boiling) inside the freezer. [. . . ] Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet. It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation. Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The power supply cable plug is provided with a contact for this purpose. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EN3409AFW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EN3409AFW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.