User manual AEG-ELECTROLUX EFC9526X/S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EFC9526X/S. We hope that this AEG-ELECTROLUX EFC9526X/S user guide will be useful to you.


AEG-ELECTROLUX EFC9526X/S : Download the complete user guide (1060 Ko)

Manual abstract: user guide AEG-ELECTROLUX EFC9526X/S

Detailed instructions for use are in the User's Guide.

[. . . ] 4 5 6 8 11 13 15 16 17 GUARANTEE/CUSTOMER SERVICE 12 Guide to use the instruction book The following Symbols will be found in the text to guide you through the instruction book Safety instructions Step by step instructions 4 electrolux IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. EN Installation · Any installation work must be undertaken by a qualified electrician or a competent person. · This hood must be installed in accordance with the installation instructions and all measurements must be adhered to. [. . . ] Charcoal Filters In the recirculation mode the charcoal filters absorb smells and unwanted odours. This filter cannot be washed or regenerated, and must be replaced when the F touch control starts to flash, or at least once every 4 months. The alarm is only triggered when the motor is on. EN Enabling the alarm signal · In Recirculation Version Hoods, the Filter saturation Alarm must be enabled at the time of installation or later. · Disconnect the mains power supply to the hood by removing the motor unit power supply cable connector, switching off the power supply at the Mains or turning the Main switch off. · Release the touch control, touch controls L, T2 and F will light up normally. · Within 3 seconds press the touch control F until the key itself flashes to confirm as follows: ·2 flashes ­ Charcoal odour Filter saturation Alarm ENABLED ·1 flash - Charcoal odour Filter saturation Alarm DISABLED To Remove/Replace the Charcoal Filters · Remove the metal grease filters · Remove the saturated activated carbon filter by releasing the fixing hooks · Fit the new filter by hooking it into its seating · Replace the metal grease filters. This appliance can be a possible fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended. Alarm signal reset · Stop the motor. · Press the touch control F for at least 4 seconds, until the touch control T1 flashes. 10 electrolux MAINTENANCE AND CLEANING Changing the halogen light · Remove the 2 screws fixing the Lighting support, and pull it out of from the Hood. EN · Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. · Replace the Support, fixing it in place with the two screws removed as above. Replacement filters and light bulbs can be obtained from your local Service Force Centre. SOMETHING NOT WORKING electrolux 11 SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. EN Symptom The cooker hood will not start Solution · Check the hood is connected to the electricity supply. Technical Information DIMENSIONS HEIGHT OF CANOPY: 60mm HEIGHT OF CHIMNEY: (UPPER SECTION) 465mm (LOWER SECTION) 740mm WIDTH OF CANOPY : 898mm DEPTH OF CANOPY: 490mm GROSS : 26, 5kg NET : 21kg ELECTRICAL SUPPLY: VOLTAGE: 220-240 V 50Hz POWER CONSUMPTION: 265W FAN MOTOR: 205W LIGHT BULB: (3 x 20 W) 60W SUITABLE FOR INSTALLATION ABOVE: ELECTRIC HOB: GAS HOB: SLOT-IN GAS COOKER SLOT-IN ELECTRIC COOKER EN 7KW (max) 10KW (max) 13. 5KW (max) 12. 4KW (max) Note: CE Marking certifies that this appliance complies with the requirements laid down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent modifications and Low Voltage directive 72/23/E. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 16 electrolux ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS This appliance must be earthed Electrical Requirements EN Any permanent electrical installation must comply with the latest I. E. E. For your own safety this should be undertaken by a qualified electrician e. g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC). Electrical Connection Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood. This appliance is fitted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, fitted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fixed wiring instructions. 78 308 regarding suppression of radio and television interference. INSTALLING THE COOKER HOOD electrolux 17 INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. [. . . ] · Insert the two screws (not supplied) in the hood body fixing holes, leaving a gap of 5-6 mm between the wall and the head of the screw. Note: If the hood is to be installed onto a hollow construction or plaster or partition board wall then special fixing screws will be required (not supplied). 11 12a 650 min. 116 116 320 X 7. 2. 1 1÷2 INSTALLING THE COOKER HOOD electrolux 21 Fitting the Hood Body · Before starting to fix the hood body, tighten the two screws Vr located on the top of the hood body. · Using a screw driver and spirit level, adjust the screws item Vr until the hood body is level. Vr EN 12a Extraction The cooker hood is more effective when used in the extraction mode (ducted to the outside). Venting kits may be purchased through your retailer or DIY store, and must be ducted to an outside vent of Ø125mm (5") or Ø150mm (6"). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EFC9526X/S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EFC9526X/S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.