User manual AEG-ELECTROLUX EDB8040

[. . . ] Children should be supervised to ensure that they do not play with the appliance. The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate! [. . . ] Turn the steam knob to select the desired steam output for each garment, if selecting the off position, it indicates ironing without steam, the iron can be used as a dry-iron. For models with auto steam control system the steam regulation is done by the temperature selector. when turning it to set temperature , it will automatically adjust steam position , as indicated on the knob. Use spray mist to pre-dampen fabrics by pressing spray button several times to release a fine mist (A). If iron is left unattended on soleplate or on the side, it turns off after 30 seconds. Cleaning (do not use any detergent) Nettoyage (ne pas utiliser de détergent) Always store iron on its heel rest. When the light turns green, unplug, hold it over a sink and pull the steam knob out (for EDB8040 set the steam knob to auto-clean). If the temperature knob is not on MAX position, it will not be possible to pull out or place back the steam knob. Do not use scouring pads or harsh cleaners on the soleplate as these will damage the surface. to remove burnt residue , iron over a damp cloth while iron is still hot. To clean the GlissiumTM soleplate (enamelled), simply wipe with soft damp cloth and wipe dry. Disposal Packaging materials The packaging materials are environmentally friendly and can be recycled. [. . . ] The iron has been put in horizontal position while there is still water in the water tank. Tyg Akryl Acetat Nylon och polyester Rayon Viskos Silke Bomullsblandningar Ull och ullblandningar Bomull Manchester Linne Denim/jeans till max till max Temperaturinställning Vrid ångväljaren till inställningen för torrstrykning och öppna locket till öppningen för påfyllning. [. . . ]