User manual AEG-ELECTROLUX AG 941

[. . . ] The above may cause serious damage to the motor ­ damage which is not covered by the warranty. Open the front cover on the machine and check that the dust bag s-bag® and the motor filter are in place. (See also Replacement of filter) 13 Open the back lid on the machine and check that the exhaust filter* is in place. [. . . ] (See also Replacement of filter) 13 Open the back lid on the machine and check that the exhaust filter* is in place. 3 Insert the hose into the hose handle until the catches click to engage (press the catches to release the hose). 14 Insert the hose until the catches click to engage (press the catches to release the hose). Increase suction power by rotating the control further up to "Max" position. stop the vacuum cleaner by rotating in the opposite direction to "Off" position. 18b* Suction power can also be adjusted by using the suction control on the hose handle. Use the nozzles as follows: Carpets: Use the combination floor nozzle with the lever in position (20). Hard floors: Use the combination floor nozzle with the lever in position (21). it may also be possible to remove the obstruction in the hose by squeezing it. However, be careful in case the obstruction is caused by glass or needles caught inside the hose. Note: The warranty does not cover any damage to the hose caused by cleaning it. 43* Larger objects can be accessed by removing the connection tube from the nozzle. disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. 45a Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. 45b In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. Electrolux does not accept liability for defects arising from neglect, misuse or accident. [. . . ] 45a Disconnect the nozzle from the vacuum cleaner tube and remove entangled threads , etc. 45b In case the turbo nozzle stops working, open the cleaning lid and remove any objects that obstructs the turbine to rotate freely. Electrolux does not accept liability for defects arising from neglect, misuse or accident. [. . . ]