User manual ACER TRAVELMATE 7300

[. . . ] TravelMate 7300 Series Notebook Computer User's Guide Copyright This is a product of Acer Inc. Acer and the Acer logo are registered trademarks and TravelMate is a trademark of Acer Inc. Texas Instruments, TI and the TI logo are registered trademarks of Texas Instruments Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. [. . . ] Insert the memory module diagonally into the slot, and then gently press down on the module until it clicks into place. 6. After new memory modules have been installed, the system automatically detects and reconfigures the total memory size. 71 Peripherals and Options Hard Disk Upgrades Larger capacity hard disks are available as an upgrade. Consult your dealer for additional hard disks that may be available. Vendor IBM IBM Model DTCA 23240 DTCA 24090 Capacit y 3. 0 GB 4. 0 GB Cylinders 6304 7944 Head s 16 16 Sectors 63 63 Follow these steps to install a replacement hard disk: 1. Turn the computer over to access the base. 72 Peripherals and Options 4. Remove two screws that secure the hard disk door; then press the hard disk door release latch and lift the door up. 5. Flip over the hard disk and disconnect the hard disk cable from the hard disk. Install the replacement hard disk by doing steps 5 and 6 in reverse order. Note: An additional hard disk can also come in the form of a module that swaps with the floppy drive or CD-ROM drive in the module bay. Refer 73 Peripherals and Options to your dealer for details. 74 5 System Utilities The computer comes pre-loaded with the following system utilities and drivers: q q q q q q q Sleep Manager suspend-to-disk utility Touchpad driver Display driver Audio driver System core logic driver File-transfer utility PC Card slot driver and application Note: Your computer may also have several application programs pre-loaded. To access the application programs, click the Start button and select the application folder. For help with an application program, consult the application's user manual or the program's online help. Sleep Manager Sleep Manager is a utility that reserves a space on the hard disk for the computer's suspend-to-disk feature. It creates a contiguous area on the hard disk where the system saves your data and system information when the suspend-to-disk feature is activated. 75 System Utilities Note: Sleep Manager starts and adjusts the space needed for suspend-to-disk mode automatically every time you start Windows 95. You do not need to access Sleep Manager for routine use of your computer. Accessing Sleep Manager To access Sleep Manager, click the Windows 95 Start button. The main Sleep Manager window shown on the next page appears. The Current Setting area shows the drive location and size of the current hard disk space reserved by Sleep Manager. The On Board Information area shows the system memory resources that will be stored when the system enters suspend mode. The total of these resources is the recommended size of the reserved hard disk space shown below the current setting area. 76 System Utilities The Enable Indicator on Taskbar check box allows you to choose whether or not a Sleep Manager status icon appears on the Windows 95 taskbar. Select this check box to enable the icon; clear the check box if you prefer not to see the Sleep Manager icon on the taskbar. Note: The Sleep Manager taskbar icon appears with an exclamation point if Sleep Manager's reserved space has not been created, or if APM is not enabled. The icon appears with a red crossed circle if the space has not been created and APM is also not enabled. When the Sleep Manager icon is displayed on the taskbar, you can display the current status of Sleep Manager by simply resting the mouse pointer on the icon. Or you can double-click the icon to access Sleep Manager, Creating Reserved Space The Create button at the top of the Sleep Manager window tells Sleep Manager to find and reserve a contiguous area on the hard disk for use in suspend-to-disk mode. Note: When suspend-to-disk mode is started, the system checks to see that space been reserved. [. . . ] Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SPT2, rated 7A 125V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4. 6 meters). Canadian DOC Notice This digital apparatus does not exceed Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le réglement sur le brouillage radioélectrique édicté par le Ministère des Communications du Canada. 119 Appendix FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. [. . . ]